Position: Home >> Dense permanent magnetic chuck
The rectangular permanent-magnetic chuck is the auxiliary fitting of various kinds of plain surface grinder, universal tool grinder and electromachining. Machine too etc. According to the structure, it can be classified as ordinary permanent-magnetic chuck, fine-pole permanent-magnetic chuck, single-inclination permanent-magnetic chuck and double-inclination permanent-magnetic chuck. The fine-pole chuck is more suitable for processing of thin & small workpiece. Because it is without requiring power source, without heating and with high precision, it is widely applied in machinery processing industry.
Standard Feature
no electric power is required
precision does not reduce by temperature rise caused by electric power
back and side rails, operating lever , clamping and screws are included
flatness 0.01mm/300mm
parallelism 0.015mm/300mm
maintenance free
Key Feature
four different kinds of holding power 8 kgf/cm² , 12kgf/cm² , 16kgf/cm² , 20 kgf/cm² for different usage make our chucks most cost effective
the low height of our chuck for more effective of the machine¡¯s space
fine pole divisions for more uniform magnetic holding power and lower remaining magnetism
Holding Power Available
S level (20 kgf/cm²): suitable for heavy milling and planing
H level (16 kgf/cm²): suitable for grinding and milling
N level (12 kgf/cm²): suitable for light grinding and EDM machining
L level ( 8 kgf/cm²): suitable for locksmith for skimming, marking , milling ,drilling and EDM machining
Usage:
Permanent Magnetic Chuck for fastening thin , small Work piece on Grinding, EDM, especially in liquid.
Features:
1) Dense distance between magnetic poles,reach (1+0.5)mm and the product can get effective magnetic force.
2) Using special sliding mode ,can control the tolerance accurately.
3) Easy handle operating.
